Re: R7000 port forwarding not working (wake-on-lan specific) Ok was wondering if there was a modem or modem/router in front of the NG router. UPnP should be disabled if you have any PF configurations set. Dec 28, 2016 Re: Setting-up Wake-on-LAN via Public Address For WOL to work you only need the MAC address and - depending on your settings - the port which is port 9 by default. The other settings are specific to the app, as it can check if the computer is already on. TeamViewer 9 Manual Wake-on-LAN www.teamviewer.com Page 11 of 12 Appendix Note: To wake up a computer, you can use TeamViewer 9 for Windows, Mac OS X, iOS, Windows Phone and the TeamViewer Management Console. To wake up a computer, follow these steps: 1. Start a device with an existing Internet connection. Open TeamViewer. I searched for the last few hours for 'R7000 port forwarding not working' on google, and there seem to be quite a few issues with this router, but none seems to relate to my specific problem. I want to forward port 9 for wake-on-lan so I can turn on my PC from anywhere and TeamView in it. Configure TeamViewer on the target computer; Wake up the target computer; Please refer to the TeamViewer Wake-on-LAN manual for a detailed description of how to set up Wake-on-LAN with TeamViewer. Wake up the target computer via its public address. Choose this method if the target computer can be reached via a public address.
in PC & Mac Hardware and Software#1
I'm trying to configure TeamViewer to use Wake on LAN to a computer in another location so that I can wake it up whenever I need it and carry on with some installations and file access through it's remote access.
The BIOS was already configured for WOL and I've already configured the network settings on Windows 10 as per the information supplied on TeamViewers website. The biggest problem is setting up the public address. I thought I had it correct by setting up the port forwarding on the Virgin Media Superhub. So my understanding is that I've added a new rule which is the computers IP address with port 9 as they suggested. I then registered under noip.com to link them together but the site seems to suggest that the ports are still blocked? I've heard that Virgin Media's Superhub's aren't very good for this sort of thing? I'm not sure what else would be missing or if I even need to use noip as a passthrough, I heard that was the easiest way around it. Comments
From DD-WRT Wiki
Jump to: navigation, search
[edit]Introduction
Wake-On-LAN (WOL) provides the ability to wake a slept/suspended, hibernating, or shut down computer, but the support for this (especially the latter) is dependent upon the hardware and BIOS/UEFI settings. Most modern computers have the WOL feature - it might be listed under PME (Power Management Events).
![]()
Reasons to use WOL with DD-WRT:
[edit]Preparation
You will need:
[edit]Enable WOL on the Computer![]()
Repeat the previous steps and go over the trouble-shooting tips until they work before proceeding.
[edit]Test that WOL works within the LAN
Hibernate, Standby, and Power-off the WOL computer, while clicking Send on the second computer, to test each mode to make sure WOL is working.
Once this step is working, you can go on to making WOL work when you are outside your LAN, such as at a cafe or another remote location.
[edit]Troubleshooting
Wake On LAN is usually disabled by default in most PCs. This feature, if optional, must be enabled in your BIOS otherwise WOL isn't going to work. Consult your motherboard's manual and BIOS screen (DEL at startup, usually). If you don't see the WakeOn-type options in your BIOS, usually somewhere in Power Management, your motherboard may not support WOL.
[edit]WOL Methods[edit]WOL through Telnet/SSH
Note: This is the preferred method to send WOL magic packets remotely.
If you have local or remote Telnet/SSH access to your router, you can wake up a machine on the LAN by using the following command:
Note that the full path to '/usr/sbin/wol' is important. Simply 'wol' will not work.
Substitute AA:BB:CC:DD:EE:FF with the actual MAC address of the computer which you wish to boot remotely. Likewise, replace 192.168.1.255 with the actual broadcast address of the network (192.168.1.255 is the broadcast address when the machine has an IP of 192.168.1.x and subnet mask of 255.255.255.0). Replace 'PP' with the port number your machine listens on (usually 7 or 9).
[edit]Remote Wake On LAN via Port Forwarding
To remotely wake up a computer over the Internet using Wake On LAN- follow these instructions:
1 - Create a port forward rule on the Web Interface (Applications & Gaming -> Port Range Forward) to the chosen ip:
2 - Add a static ARP entry by typing the following line into the Administration -> Commands section of the Web Interface and then saving with Save Startup.
3 - Reboot the router, or execute the startup commands manually.
[edit]Automatic Wake-On-LAN Daemon
The Automatic WOL daemon will send out a periodic wake on lan packet at the intervals you specify. This may be useful to keep a system online most of the time even if it is turned off. (eg: A Media Center PC).
For Interval you can enter a value in seconds as low as 15 seconds and as high as 86400 seconds (1 day).Host name should be the broadcast address for your LAN. eg: 255.255.255.255 or 192.168.1.255.SecureON Password is computers that have a BIOS feature that secures the WOL function. If you do not have a BIOS that requires this form of password then you can leave the box blank or type in 00-00-00-00-00-00.MAC Address(es) should contain the MAC address of the networked machines you want a WOL to be sent to on your LAN.
The packets generated by the WOL daemon are sent to UDP port 40000. You likely will not need to worry about this unless the system you are attempting to send the WOL packet is on another subnet or you are trying to monitor the packets.
Port Forwarding Mac Teamviewer Wake On Lan Windows 7
note: the UI says that the Interval accepts a range of 1-86400 seconds but it will only send out a WOL packet at a minimum of 15 second intervals. All values below 15 are accepted but the interval will still be every 15 seconds.
A useful tool for watching the WOL packets on a Windows computer is available at www.depicus.com/wake-on-lan (use port 40000 when monitoring) Or you can use a more generic protocol analyzer tool like Wireshark.
[edit]WOL Scripts
[edit]See Also (forum discussions)[edit]ReferencesConfigure Wake On Lan Teamviewer
Retrieved from 'http://wiki.dd-wrt.com/wiki/index.php/Wake-on-LAN_%28tutorial%29'
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2020
Categories |